Tuesday, August 4, 2009

Nature Printing

In previous blogs I have described the three major types of printmaking processes: relief, intaglio and planographic. Today I will talk about an uncommon process, “nature printing.”

Nature printing is not a single process, but includes any printmaking procedure where actual natural specimens—such as a plant or insect— are used to make prints. The earliest known attempt at nature printing was by Leonardo da Vinci who printed images of plants by inking the plants and then pressing them by hand onto the paper. This process was used infrequently into the eighteenth century, but proved generally unsatisfactory because of the problems of getting uniform impressions and wear on the specimens, which limited the number of prints possible.

In the nineteenth century a new approach was tried, where the specimen was not used directly to make the print, but instead it was used to make a printing plate of wood or metal, from which the print was then made. The most practical process was developed in 1853 by Alois Auer in Vienna. It involved laying the item to be illustrated on top of a plate of soft lead. The specimen was then covered with a hard steel plate, and this sandwich was run through an intaglio printing press. The pressure forced the image of the specimen into the soft lead. The ink could then be applied to the lead plate and prints made from this. It was also possible to transfer the image to a copper plate by electrotyping and a reverse plate made from that for printing.

This process was most successfully used by Henry Bradbury, who used it to produce large nature prints for Ferns of Great Britain & Ireland in 1855 and The Nature-printed British Sea-weeds in 1859-60. These images are not only very decorative, but each print precisely and delicately traces the image of the plants, capturing the detail of nature itself almost “first hand.” Another interesting example of nature printing was Sherman F. Denton’s use in 1900 of actual butterfly wings to make the prints for As Nature Shows Them: Moths and Butterflies of the United States. Denton created the prints by pressing wings into the pages. He recorded that he had to collect over 50,000 insects in order to produce his work!

It is interesting that towards the end of the twentieth century there was a resurgence in interest in nature printing, resulting in the formation of the Nature Printing Society in 1976. You can read more about this society and nature printing on their web site.

8 comments:

  1. I have a printing question. How can I tell what printing process was used on my 1912 print. I have a 30 and 100 power loop and would like to know when looking at my older print up close, how can I say for sure what I am looking at? Thanks Judy

    ReplyDelete
  2. There is no easy answer to this question as there are so many different ways in which prints were made in the early 20th century. The best thing is to get hold of Bamber Gascoigne's book "How to Identify Prints." This is a terrific book on just the question you ask and it has lots of detail and good photographs.

    ReplyDelete
  3. I wanted to let you know about an exhibition of nature prints that is opening at Wave Hill, a public garden and cultural center in the Bronx, overlooking the Hudson River, on April 3, 2010. It's called Propagating Eden: Uses and Techniques of Nature Printing in Botany and Art. If you'd like to know more, please visit our website at http://www.wavehill.org/arts/future.html
    All the best.
    Martha Gellens

    ReplyDelete
  4. Thanks for the note! Sounds like a great exhibit. Can you send me any more information directly to my email? I'd like to publicize this exhibit...

    ReplyDelete
  5. I recently came across your blog and have been reading along. I think I will leave my first comment. I don’t know what to say except that I have enjoyed reading. Nice blog. I will keep visiting this blog very often

    ReplyDelete
  6. I came across your blog. I really enjoyed reading about nature printing, prints are really decorative.

    ReplyDelete
  7. Nature printing is a printing process, developed in the eighteenth century, that uses the plants, animals, rocks and other natural subjects to produce an image.Great post

    ReplyDelete